It’s Spring: Time to open your pool! – Part 2: Chemicals
Okay, now you are ready for the next step … Per the last Blog you’ve prepped the pool equipment, set the water level and got the pump and filter working so the water is circulating nicely. Remember if you have an old but clean set of cartridges filter, use these at the early opening stage to filter out the worst of the winter dirt and then switch in your newer set once the water is clear. If you have a sand filter, just remember you will have to watch the pressure gauge and do an earlier backwash to flush out the winter dirt.
1. Time for the Pool Opening Kit
Come into the store for up a Gib-San Pool Opening Kit if you haven’t already. It contains Super Chlor, a stabilized fast dissolving granular chlorine product to establish a chlorine base, and Algaecide HD40 to get rid of green algae. This kit has enough opening chemicals for pools up to 80,000 liters.
This is good for opening salt pools too since you still need to establish some chlorine in your pool until the chlorine generator is functioning. The water is probably too cold to put salt in now. Beware of taking a salt reading if the water is cold as it won’t give an accurate reading until the water is around 70°F / 21°C. You don’t want to over-salt the water.
BONUS OFFER* on the purchase of the Pool Opening Kit … Until May 14th
* Receive one of the following FREE: (Per details in store)
- Gib-San Filter Cleaner OR
- Gib-San Cell Cleaner with opening kit purchase
2. Run it & fine-tune it
Let the pool operate for 3 or 4 days with the opening chemicals and then bring a water sample into the Gib-San Store at 711 Kipling for a professional computerized water test. Our professional test equipment checks more factors and to a higher standard than test strips. If you need a lot of adjusting, repeat the professional test in a couple of weeks or as advised by the testing technician.
3. Ongoing monitoring with test strips
Monitor your pool water using Gib-San Test Strips once or twice a week depending on weather and bather load, and bring the water in for a professional “ fine-tuning” test every month.
NEW Gib-San Test Strips provide 7 professional tests … more than most strips!
- Total Chlorine or Bromine
- Total Calcium hardness
- Free Chlorine
- Total Alkalinity
Easy to read… just color match at the “OK” marks!
The next blog will cover “Keeping your Pool Balanced and Clear”
Do you have some stories to share about your pool opening experiences? Email me at firstname.lastname@example.org and I will put it in another blog post for all to benefit from!
Do you have a question or comment about this blog or about the experience of buying a hot tub?
What People Are Saying About Our Work
From start to finish, Gib-San has been an absolute pleasure to work with. Every step of the way was handled professionally and punctual. Our end result was even more amazing than we had imagined and we would recommend them to anyone looking for a detail-oriented and friendly company!Julia B
We were very impressed with GibSan. Would highly recommend this company. All the members of the Gibsan team were very respectful and professional. It was the hottest summer and our backyard has direct sunlight. The Gibsan team worked very hard everyday despite the incredibly hot working conditions. They arrived dressed in GibSan attire and they were friendly and always respectful. We absolutely love, love, love our new pool!!! We would highly recommend the GibSan team!!! Special thanks to John, Mario and his fantastic team!!!wyamamoto
Gib-San was terrific. They were very nice to work with, had great design ideas and finished the project on time. We love our new pool! Special thanks to John and Reggie. The whole team was great.R. Borins
Start Your Backyard Oasis Today
We are committed to bringing you the most value for your money, start today with a FREE consultation.